Chimney Repair in Conroe, TX | Chimney Sweep Conroe

Chimney Repair in Conroe - You See the Footage Before You Get a Price

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for Conroe Homeowners

Most chimney problems in Conroe announce themselves quietly: a faint stain on the ceiling near the chase, a cap that’s gone crooked after a storm, mortar that crumbles when you brush it with a thumb. By the time a fireplace smells smoky in the off-season or water shows up in the firebox, something in the system has been failing for a while. We handle that whole list, from cap to crown, so a small defect doesn’t grow into a rebuild.

Call (888) 401-8620

Our technicians have up to 13 years of experience, and we work with the professional-grade brands chimney trades specify by name, not hardware-store substitutes. We inspect it and we fix it under one company, which means the person who finds the problem can also resolve it. Same-day service is often possible in Conroe when you call early, and the written estimate sets the final price before any work begins. Call (888) 401-8620 to get yours moving.

Chimney Cap Installation

Chimney Cap Installation puts a fitted lid and spark screen on top of the flue, and it’s the cheapest insurance a Conroe chimney has against rain, birds, squirrels and downdraft. You need one when the flue is open to the sky, when debris keeps landing in the firebox, or when smoke rolls back into the room on still evenings. We size caps from Famco and Copperfield components so the fit is snug around your actual flue dimensions rather than a generic clamp-on. Typical cost runs $150-$450 depending on flue count and cap style. The written estimate fixes the number.

Measuring the Flue Correctly

A cap that sits loose rattles in wind and lets water in at the edges. We measure the flue’s outer and inner dimensions and check the crown height before ordering anything. That’s why two chimneys on the same street can take different caps.

Single-Flue and Multi-Flue Roofs

Homes with a fireplace plus a furnace flue need a cap that covers both without bridging the gap between them. We fit multi-flue lids that leave each flue drawing on its own. It’s a small detail that keeps one appliance from pulling smoke down the other.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney Cap Replacement removes a failed cap and installs a new one, and it’s the right call when the old cap is rusted through, bent, missing screen panels, or sitting loose after a wind event. Conroe’s summer storms and the occasional burst of hail do a number on thin-gauge caps, and a cap that’s lost its screen stops doing the job it was installed for. We pull the old unit, inspect the flue top while we’re up there, and fit a replacement from our Famco and Copperfield lines. Expect $175-$500 depending on size and material. It’s a short job when the crown underneath is sound.

When Repair Beats Replacement

A cap with one torn screen panel or a loose fastener is worth fixing rather than replacing. We tell you which situation you’re in before quoting, because replacing a serviceable cap wastes your money. Rust through the body of the cap is the usual line where replacement wins.

Materials That Hold Up Locally

Stainless and heavy-gauge galvanized caps outlast painted steel in this climate. We’ll show you what we’re installing and why it suits the exposure on your roof. That matters more than the label on the box.

Chimney Liner Installation

Chimney Liner Installation means fitting a new flue lining inside the existing chimney, and it’s necessary when the original clay tiles are cracked, spalled, unseated or missing in sections, or when an appliance needs a correctly sized flue it doesn’t have. A damaged liner lets heat and combustion gases reach the surrounding structure, which is a genuine safety matter and not a sales talking point. We install DuraFlex flexible stainless systems, the liner chimney professionals recommend by name, and we use HeatShield for resurfacing where the existing liner can be restored rather than replaced. Costs typically run $2,400-$6,500 depending on height, flue count and liner diameter.

Relining Versus Resurfacing

HeatShield rebuilds a damaged flue from the inside by casting a new surface against the old tile. It suits liners that are cracked but still structurally sound. When tiles are displaced or missing, a full DuraFlex liner is the honest answer, and we’ll say so.

Insulation and Appliance Fit

An uninsulated liner in an exterior chimney loses heat fast, which hurts draft and invites creosote buildup. We discuss insulation wraps as part of the job, not as an upsell. We also confirm the liner diameter matches the appliance it serves.

Chimney Flashing Repair

Chimney Flashing Repair addresses the metal and sealant where the chimney meets the roof, and it’s the fix for water stains that appear on ceilings near the chase after heavy rain. Flashing fails when the step flashing pulls away, when nails back out, or when old tar sealant cracks under a Texas summer. We re-seat, re-seal or rebuild the flashing layers and tie them back into the shingles properly. Most flashing work runs $300-$900 depending on roof pitch and how much of the assembly needs replacing, and the estimate is free.

Tracing a Leak to the Right Place

Water rarely enters where the stain shows up. We check the flashing, the crown, the cap and the brick above the roofline before recommending anything, because sealing the wrong spot just moves the leak. That diagnostic step is part of the visit.

Sealants and Metal That Last

Roofing tar is a patch, not a repair. We use flashing components and sealants rated for the heat and UV this area delivers. The goal is a joint that’s still tight after a few summers.

Chimney Crown Repair

Chimney Crown Repair fixes the concrete slab on top of the chimney that sheds water away from the masonry below. A crown with a hairline crack, a crumbling edge or no overhang lets water soak into the brick and freeze, thaw and swell its way down the chimney over time. Conroe’s clay soils and hot, wet summers are hard on a thin crown, so we rebuild them with a proper slope and overhang rather than skimming over the damage. Crown work typically costs $350-$1,200 depending on size and whether we cast a new cap. HeatShield products come into play when the flue top needs resurfacing at the same time.

Why the Overhang Matters

A crown that stops flush with the brick sheds water straight down the chimney’s face. A correct crown projects past the masonry and carries water clear of it. This is the single most common flaw we find on older Conroe chimneys.

Crown Repair Alongside a Sweep

Crown defects usually surface during a routine sweep, and we handle both in one visit. You get a clean flue and a crown that actually works. Nothing gets handed off to another company.

Chimney Repair Companies

Chimney Repair Companies vary widely in what they actually do, and the difference shows up in materials and in whether the inspection and the fix come from the same outfit. The right time to compare is before you have a problem, or right after an inspection turns one up. We cover sweep, repair and inspection under one company so nothing gets lost between vendors, and we use Gelco and Olympia Chimney supply lines for the less common parts other outfits can’t source. Repair pricing runs from a few hundred dollars for small fixes to several thousand for structural work, and the written estimate sets the number.

Questions Worth Asking

Ask what brand of liner or resurfacing product they’ll use, and ask to see the camera footage from the inspection. A company that won’t name its materials or show its evidence is telling you something. We answer both without hesitation.

One Company From Inspection to Repair

When the inspector and the repair crew are the same operation, the scope doesn’t shrink or drift. You see the footage, you get the estimate, and the work that follows matches what you approved. That accountability is the whole point.

Chimney Masonry Repair

Chimney Masonry Repair covers the brickwork, mortar joints and stone of the chimney itself, and it’s needed when joints have receded, bricks have spalled or gone soft, or a section of the stack has shifted. Water is almost always the root cause, and in this part of Texas the culprit is usually a failed crown or flashing letting moisture into the brick. We repoint joints, replace spalled brick and rebuild damaged sections, matching the existing masonry as closely as the material allows. Masonry work typically runs $600-$3,500 depending on the extent, and we tell you plainly when a repair can safely wait a season.

Tuckpointing and Joint Depth

Smearing mortar over a worn joint looks fine for a year and then fails. We grind out the old mortar to proper depth and pack new material in so it bonds. That’s slower, and it’s the only version that lasts.

Spotting Water Damage in Brick

White chalky deposits, flaking faces and brick that crumbles under a fingernail all point to moisture working through the masonry. Catching it early keeps a repoint from becoming a rebuild. The camera inspection tells us how far it’s gone.

Brands We Service

We work with DuraFlex liner systems and know where flexible stainless wears, kinks and loses its seal at the appliance collar. HeatShield resurfacing is a system we specify for restoring damaged flues, and we understand how it behaves when cast against tile that’s already cracked. On the finish side, Famco and Copperfield caps and dampers are familiar territory, so the mechanical and weatherproofing components beyond the flue get the same attention as the liner itself.

Gelco and Olympia Chimney supply lines give us access to a broad parts ecosystem for repairs that don’t fit a standard catalog page. That matters when a homeowner has already been told their chimney needs a full rebuild for want of one component. We service these brands and know where each one tends to wear out. Whether you have DuraFlex, HeatShield, Famco, Copperfield, Gelco, Olympia Chimney or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • Water stains on the ceiling or chase: A brown ring near the chimney usually means flashing, crown or cap is letting water in. It gets worse with every storm, and the repair gets bigger with it.
  • Crumbling mortar or loose bricks: If mortar rakes out under a screwdriver or a brick rocks in place, the stack is losing integrity. Left alone, a repoint turns into a rebuild.
  • A strong smoky or creosote smell in warm weather: That odor means deposits are sitting in the flue and drawing down into the house. It’s your cue to book a sweep and inspection before heating season.
  • Visible cracks in the liner or flue tiles: Cracks let heat and gases reach the structure around the chimney. This is the one problem we never suggest waiting on.
  • A damaged or missing cap: An open flue takes in rain, nests and debris year-round. It’s a quick fix that prevents the expensive ones.

Our Process, Step by Step

  1. 1
    Call and book. We answer 24/7 on (888) 401-8620, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. We ask what you’ve noticed so we arrive prepared.
  2. 2
    Inspect with a camera. We run a camera down the flue and check the firebox, damper, crown, cap and flashing from the roof. You see the footage with us, so nothing is recommended on our word alone.
  3. 3
    Get a written estimate. We price the job per scope, name the materials (DuraFlex, HeatShield or whichever product fits), and tell you what can wait. The estimate is free and it sets the final price.
  4. 4
    Do the work. Repairs are completed by technicians with up to 13 years of experience, using the professional-grade components we quoted. Sweeping and repair often happen in the same visit to save you a second appointment.
  5. 5
    Confirm the result. We show you the finished work and how the flue is drawing before we leave. If a follow-up inspection makes sense down the road, we’ll say so.

How Much Does Chimney Repair Cost in Conroe?

Most chimney repairs in Conroe land somewhere between $150 and $1,200, and the outliers are liner and structural work. A typical cap installation or replacement runs $150-$500 depending on flue count and material. Flashing repair sits around $300-$900 depending on roof pitch and how much of the assembly needs rebuilding. Crown work runs $350-$1,200, with a full cast crown at the top of that range. Masonry repointing and brick replacement typically cost $600-$3,500 depending on how much of the stack is affected. A full liner installation using DuraFlex is the largest line item, typically $2,400-$6,500 depending on chimney height, flue count and liner diameter.

What moves the price: chimney height, roof pitch and access, the number of flues, whether the crown or flashing has to come off to reach the problem, and whether we’re repairing or replacing. What keeps the price honest is the camera inspection. We quote from what the lens shows, not from what a quick glance from the ground suggests. If your liner is intact and only the cap is failing, we tell you that and quote the cap. Nothing is recommended without evidence you can see yourself, and we say plainly when a repair can safely wait.

Every estimate is free, and the written scope fixes the final number. To avoid overpaying, get the material names in writing and ask whether the inspection footage comes with the quote. Ours does, along with a clear list of what’s included: sweep, camera check, photo report and the repair itself. Chimney Sweep Conroe handles the full cycle under one company.

Our Service Area Near Conroe

We work throughout Conroe and the surrounding communities: Panorama Village, Shenandoah, Oak Ridge North, Willis, Pinehurst, Cut and Shoot, Cleveland, Tomball and Spring. Response times depend on the day and how far out you are, but most of these areas fall within a normal dispatch window when you call during the morning. If you’re in Panorama Village or Shenandoah, you’re close enough that scheduling is rarely a problem. Homeowners further out toward Cleveland or Tomball should call early to lock in a slot. Our chimney repair page covers the full scope of what we handle locally.

Serving Conroe, TX – Our Local Coverage Area

We serve Conroe and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Repair in Conroe

Schedule Your Chimney Repair Service in Conroe Today

One camera inspection tells you what’s actually wrong and what it costs to fix, and the estimate is free. If your cap is failing, your crown is cracked or your liner needs attention, we’ll show you the evidence and quote the job in writing. Call (888) 401-8620 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. For neighbors in Shenandoah, our chimney repair page covers your area.

Written by the team at Chimney Sweep Conroe.

Why Conroe Chooses Chimney Sweep Conroe

We set the standard for chimney repair in Conroe.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Conroe

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Conroe Customers Say

Trusted by homeowners across Conroe and surrounding areas.

★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Rosa Torres
★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Javier Vargas
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Jason Schaefer

Ready for Chimney Repair in Conroe?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Conroe.

(888) 401-8620

Request a Free Estimate in Conroe

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7