Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Conroe
If your chimney is pulling in water, shedding brick faces, or smoking back into the room, the fix starts with someone who knows what Conroe chimneys actually go through. We work on the fireplaces, wood stoves, inserts, and manufactured metal chimney systems common across Montgomery County, from the older acreage properties off FM 1488 to the newer builds around Lake Conroe. Our technicians have up to 13 years of experience, and we inspect first so the repair matches the real problem. Call (888) 401-8620. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Conroe Homeowners Call Chimney Sweep Conroe for Chimney Repair
Conroe is our home market, and it shows in the work. We know that a chimney on a semi-rural property near the Piney Woods usually needs a different conversation than one on a 1990s tract home in a south Conroe subdivision. That difference matters when we’re recommending a repair.
We work with professional-grade materials from brands chimney professionals specify by name: HeatShield for resurfacing, DuraFlex for liner systems, and Olympia Chimney and Gelco for the supply lines that keep less common fixes within reach. Famco and Copperfield cover the caps and dampers that finish the job. When an inspection turns up a problem, we can execute the repair ourselves instead of handing you off to a separate contractor. We inspect it and we fix it.
On timing: our technicians can usually reach most Conroe addresses without the long runs that come with outlying areas, and we’ll give you a straight window when you call. What we won’t do is promise an exact dispatch minute over the phone. Call (888) 401-8620 and we’ll book you into the next opening.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Crown Repair in Conroe
Chimney crown repair in Conroe is one of the most common jobs we quote, because the crown is where water gets in first. The crown is the concrete cap on top of the masonry chimney. When it cracks or spalls, rain runs down into the flue and the brick beneath it. In our Gulf humidity, that moisture barely dries out, so a small crack can turn into a rusted damper or a soft brick within a couple of seasons. A typical crown repair in Conroe runs $450 – $1,100, depending on whether we’re resurfacing, rebuilding, or replacing. The written estimate sets the final price.
What Crown Repair Actually Involves
We remove loose material, re-form the crown slope so water sheds away from the flue, and seal the joint where the flue meets the crown. On badly cracked crowns we may rebuild with a proper overhang to keep runoff off the brick face below.
Signs a Crown Needs Attention
Look for visible cracking on top, white chalky streaks on the brick, or water staining inside the firebox after rain. A camera inspection confirms whether the damage stops at the crown or has already reached the flue.
Chimney Repair Companies in Conroe
Choosing among chimney repair companies in Conroe comes down to one question: can they show you what they found? A camera inspection and a photo report should come with every recommendation, because that’s the only way you can verify a liner needs replacing rather than taking it on faith. Mortar repointing, tuckpointing, spalling brick repair, flashing repair, and full chimney rebuilding are the core of the work we do here. Typical costs in Conroe run $300 – $700 for repointing and tuckpointing, $400 – $900 for flashing repair, and $2,500 – $7,000 for a chimney rebuild. The written estimate sets the final price.
Repointing and Tuckpointing
Old mortar on a ranch or farmhouse chimney outside the city limits often crumbles before the brick does. Repointing replaces that mortar to spec. Tuckpointing is the finer version, used where the joint needs a cleaner finish.
Rebuilding and Waterproofing
When spalling has gone deep enough that the brick faces are flaking off, rebuilding the affected section is often cheaper than patching it repeatedly. A breathable waterproofing coat on a sound chimney helps the brick dry out rather than trapping moisture.
Trusted Brands We Service in Conroe
We work with products from DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That lineup covers the full chimney: flexible stainless liners, resurfacing systems, caps, dampers, and the smaller venting parts that finish a job. We don’t stock parts locally and we don’t carry inventory on trucks; we order what the job calls for and schedule the install when it arrives. In practice, that means a straightforward repair gets moving quickly, and a less common part takes a day or two longer to source. We’ll tell you which you’re looking at upfront, and the written estimate sets the price. The brands chimney professionals specify by name are the brands we put in our quotes.
Common Chimney Repair Problems We See in Conroe Homes
- Glazed creosote in manufactured metal flues. When a wood stove or insert burns daily through a December – February cold snap, third-degree creosote can glaze hard inside the pipe. A standard brush skips right over it, which is why we inspect before sweeping.
- Rust-through and seam separation on metal systems. Conroe’s humidity keeps dormant metal chimneys damp for most of the year. Seamed pipe left wet develops rust that quietly weakens the whole assembly.
- Pine-needle-packed cap screens and squirrel intrusion. Piney Woods properties often have tall pines overhanging the cap. Needles pack the screen, squirrels move in during the off-season, and both block draft.
- Spalling brick and cracked crowns. Older ranch and farmhouse chimneys on acreage shed brick faces as trapped moisture expands. A crown repair and waterproofing usually stop it before a rebuild is needed.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Conroe, TX
Honest pricing for chimney repair in Conroe: crown repair $450 – $1,100, mortaring and tuckpointing $300 – $700, flashing repair $400 – $900, waterproofing $350 – $800, and a chimney rebuild $2,500 – $7,000. A reline using a DuraFlex system typically runs $2,500 – $6,500 depending on flue length and diameter. A camera inspection and photo report are included. What moves the number is access, height, the condition of what’s underneath, and whether a manufactured system needs parts sourced. The written estimate sets the final price, and the estimate itself is free. You’ll see the photos before you see the quote, so nothing is recommended without evidence you can check for yourself.
We Also Serve Cities Near Conroe
We also work in Shenandoah, Cut and Shoot, Oak Ridge North, and Spring. If your home sits just outside the Conroe city limits, the same inspection-first approach applies. Our chimney repair team covers this stretch of Montgomery County and the surrounding area. Call (888) 401-8620 to book, and we’ll confirm coverage and timing for your address.
Serving Conroe, TX – Our Local Coverage Area
We serve Conroe and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Conroe
Yes, a shared stack can let one appliance pull exhaust from another. That cross-contamination risk is real in older Conroe properties where two flues share a single chase, and the fix is usually a blocked-off or properly separated flue. Call (888) 401-8620 for an exact quote – estimates are free.
Yes. Manufactured metal chimney systems are common across rural and Lake Conroe-area homes, and we work on them alongside masonry chimneys. Rust, seam separation, and glazed creosote in metal pipe are the problems we see most. Call (888) 401-8620 for an exact quote – estimates are free.
Because pines overhang the cap, and needles drop constantly. Those needles clog the screen and kill draft, and squirrels use the packed screen as a doorway into the flue. A cap with the right screen size and clearance reduces both. Call (888) 401-8620 for an exact quote – estimates are free.
Yes, and it’s cheap insurance. Even a few weeks of daily burning lays down enough creosote to matter, and the off-season humidity leaves metal flues damp for months. An inspection with a photo report shows you what’s inside before the next burn season. Call (888) 401-8620 for an exact quote – estimates are free.
First-degree creosote is a light, sooty flake a standard brush removes without trouble. Third-degree creosote is glazed and hard, bonded to the flue so a brush skips over it, and it needs rotary cleaning or relining to address. Call (888) 401-8620 for an exact quote – estimates are free.
Book Your Chimney Repair in Conroe
Whether you’re getting ahead of a cold front, working through a squeaky flue, or settling into a recently bought home with an uninspected fireplace, we’ll inspect it, show you the photos, and tell you plainly what can safely wait and what shouldn’t. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (888) 401-8620 for a free estimate. Clean flue. Sound liner. Safe fire.
Written by the team at Chimney Sweep Conroe.