Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Conroe?
Chimney repair in Conroe typically costs $250 to $1,200 for common fixes like crown work, flashing, and minor masonry, while a full reline or rebuild runs $1,800 to $7,500 depending on the liner system and how much structure needs replacing. A chimney inspection first, usually $100 to $250, tells you which category your chimney falls into before anyone quotes a repair. The written estimate sets the final price, and estimates are free.
We handle cleaning, repair, and inspection as one scope of work, so the person who finds the problem is the same company that fixes it. That matters in Conroe, where a masonry chimney on a 1990s build in April Sound can look sound from the driveway and still have a cracked crown letting water into the smoke chamber.
Key Takeaways
- Most single-repair jobs in Conroe land between $250 and $1,200.
- Relining with a stainless system is the largest common expense: roughly $1,800 to $4,500 for most homes.
- Inspections cost $100 to $250 and usually find two or three small issues worth fixing together.
- We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – brands chimney professionals specify by name rather than substitute parts from a hardware store shelf.
- Free estimates, licensed and insured, and same-day service when the schedule allows. Call (888) 401-8620.
Chimney Repair Cost Breakdown (2026)
Here’s what the work typically costs in the Conroe market. These are estimates, not quotes; the written estimate you get after an inspection is the number that counts.
| Repair | Typical Cost | What It Covers |
|---|---|---|
| Chimney inspection | $100 – $250 | Full visual inspection of flue, firebox, crown, flashing, and exterior masonry |
| Chimney sweep / cleaning | $150 – $300 | Creosote removal, soot clearing, and a basic condition check |
| Crown repair or rebuild | $300 – $900 | Patching hairline cracks or pouring a new crown with proper overhang |
| Flashing repair | $250 – $700 | Resealing or replacing the metal that sheds water where the chimney meets the roof |
| Masonry and tuckpointing | $400 – $1,500 | Repointing mortar joints, replacing spalled brick near the roofline |
| Damper replacement | $300 – $700 | New top-mount or throat damper, including Famco components where they fit |
| Chimney cap installation | $200 – $550 | Cap and spark screen sized to the flue, guarding against rain and animals |
| HeatShield resurfacing | $900 – $2,000 | Resurfacing a damaged clay liner instead of removing it |
| Stainless steel relining | $1,800 – $4,500 | DuraFlex flexible stainless liner for a failed or undersized flue |
| Partial chimney rebuild | $2,500 – $7,500 | Rebuilding the structure from the roofline up when damage goes deeper than the surface |
What moves a job up or down that list comes down to three things: how deep the damage runs, what has to come apart to reach it, and which liner or cap system your flue actually needs. A flashing repair is a two-hour job. A rebuild is a multi-day masonry project with scaffolding. Same chimney, very different price.
One thing worth knowing before you compare quotes: a cheap quote that specifies a generic liner is not the same product as one that specifies DuraFlex or a HeatShield resurfacing. Ask what brand goes in the flue. If the answer is vague, the quote is vague.
What Affects Chimney Repair Pricing in Conroe
Conroe chimneys are mostly masonry, mostly on homes built from the 1970s through the 2000s, and mostly asked to handle a heavy winter burn season followed by a wet spring. That combination shapes pricing more than anything else.
- Liner condition is the big fork in the road. A cracked clay tile can sometimes be resurfaced with HeatShield for a fraction of a full reline. A liner that’s collapsed, offset, or the wrong size for the appliance needs a new stainless system. The inspection tells you which. We’ve seen plenty of Conroe homes where the homeowner expected a reline and only needed resurfacing, and vice versa.
- Masonry chimneys sit exposed to summer heat and heavy rain. Brick and mortar expand and contract through Conroe’s hot, humid summers and the frequent downpours that come with them. That’s what spalls brick faces and opens mortar joints. Repointing a section costs a lot less than rebuilding it, which is why catching it early pays.
- Crown and flashing failures are the most common water entry points. A crown that’s cracked or poured flat (no overhang) lets water run down into the smoke chamber. Flashing that’s pulled away from the roof lets it in at the roofline. Both are moderate repairs now and structural repairs later.
- Roof pitch and access add labor. A steep roof or a chimney on the far side of a two-story house means more setup time. That’s real labor, and it’s honest to price it.
- Chimney height and flue size. A tall flue needs more liner material. An oversized flue on a modern insert may need an insulated liner sized correctly, which costs more than a straight replacement of the same diameter.
- Which parts the job needs. Caps, dampers, and ventilation components come in different grades. We install Famco and Copperfield products because they hold up to Conroe’s weather, and we can source less common parts through Olympia Chimney and Gelco supply lines rather than telling you the part doesn’t exist.
One note on safety before we go further. Anything involving the flue interior, the crown at the top of a chase, or roof-level masonry is not a homeowner job. A chimney is a working structure with a fire inside it and a fall hazard outside it. Our technicians have up to 13 years of experience, and that experience is exactly what keeps this work off ladders you shouldn’t be on.
Repair or Replace: Which Makes Sense?
Repair is usually the right call when the damage is in one area – a crown, a flashing joint, a few courses of brick – and the liner and firebox are sound. Replacement or a full rebuild makes sense when the liner has failed through most of its length, the chimney leans, or the masonry has water damage through multiple sections. The break-even usually sits somewhere around the cost of a reline plus a partial rebuild. Past that, you’re paying masonry prices for a chimney that’s still older than the house next door. An inspection is what tells you which side of that line you’re on, and it’s why we inspect before we quote.
How to Save on Chimney Repair
The biggest savings in chimney work come from timing. Repair a crown crack at $300 now instead of a rebuild at $4,000 in three years. A few practical ways to keep the number down:
- Bundle the small stuff. If the inspection finds a cracked crown, worn flashing, and a missing cap, fixing all three in one visit costs less in labor than three separate appointments.
- Get an annual sweep. A $150 to $300 cleaning each fall catches problems while they’re still cheap. Creosote buildup is also a fire risk, not just a maintenance item.
- Ask about resurfacing before relining. If your clay liner is cracked but structurally in place, HeatShield resurfacing can extend its life at a lower cost than a full stainless reline. Not every chimney qualifies – the inspection decides – but it’s worth asking.
- Don’t wait for water damage. Water is the slow, expensive problem. A crown or flashing fix done this season prevents the masonry repair you’d otherwise book next year.
- Get a free estimate in writing. Call (888) 401-8620 and we’ll inspect, explain what we found, and put the price in writing before any work starts.
Every estimate is free, and the price is set per job by that written estimate – no surprises after the work starts. If you’ve already had a quote from someone else, we’re glad to look at it with you and tell you what brand of liner or cap it specifies.
Why Material Choice Changes the Price
Two quotes for the same repair can differ by hundreds of dollars because one specifies a professional-grade component and the other specifies a generic substitute. That’s the whole game in chimney repair. We work with DuraFlex liner systems, HeatShield resurfacing, Gelco and Olympia Chimney parts, and Famco and Copperfield caps and dampers – the brands chimney professionals specify by name. When you compare estimates, compare the materials line by line. A cheaper quote that leaves the brand off the page is usually cheaper for a reason. Know exactly what’s inside your chimney before you pay for it.
Same-Day Repair and How Booking Works
Many common repairs – caps, dampers, flashing, crown patching – can be handled the same day the inspection confirms them, schedule permitting. Call (888) 401-8620. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday (we’re closed Saturday). A call outside those hours is booked into the next opening. Our Chimney Sweep Conroe team handles the full cycle: we inspect it, we tell you what it needs, and we fix it, with no handoff to a second company.
If you’re not sure whether you need a repair or a cleaning first, start with the inspection. It’s $100 to $250 and it prevents you from paying for the wrong service. You can read more about our chimney repair work and what a typical repair visit involves.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Conroe?
Most chimney repairs in Conroe cost $250 to $1,200, covering crown repair, flashing, caps, dampers, and minor masonry. Relining runs $1,800 to $4,500, and a partial rebuild runs $2,500 to $7,500. Call (888) 401-8620 for a free estimate – the written quote sets the final price.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper – HeatShield resurfacing runs $900 to $2,000 versus $1,800 to $4,500 for a full stainless reline. Resurfacing only works if the existing clay liner is still structurally sound, so the inspection decides. Call (888) 401-8620 and we’ll tell you which applies to your flue.
How much does a chimney inspection cost in Conroe?
A chimney inspection costs $100 to $250 in the Conroe area, and it’s the step that makes every repair quote accurate. We inspect before we quote, so the price you get reflects what’s actually in your chimney. Call (888) 401-8620 to book one.
Can you come today?
Same-day service is often available for inspections and common repairs like caps, dampers, and flashing, depending on the schedule. Call (888) 401-8620. We answer 24/7, with fast dispatch 7am to 7pm, Sunday through Friday.
Why do chimney repair quotes vary so much in Conroe?
Quotes vary by $300 to $1,000 or more on the same job because they specify different materials and different depths of repair. A quote naming DuraFlex, HeatShield, Famco, or Copperfield parts is pricing real components; a quote that names nothing is a guess. Call (888) 401-8620 and we’ll price the actual work in writing.
Get a Written Chimney Repair Estimate in Conroe
If your chimney has been sitting unswept, if the crown looks cracked, or if you’ve just bought a Conroe home with a fireplace nobody has looked at, start with an inspection and a free estimate. We’ll tell you what we found, what it costs to fix, and which products go into the repair. Clean flue. Sound liner. Safe fire. Call (888) 401-8620 for a free estimate – we answer 24/7, with fast dispatch 7am to 7pm, Sunday through Friday.
Pricing reflects the Conroe market as of 2026. Chimney Sweep Conroe offers free estimates – call (888) 401-8620.
Written by the team at Chimney Sweep Conroe.
What Our Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Rosa Torres"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Javier Vargas"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Jason Schaefer