Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Pinehurst, TX
Chimney inspection in Pinehurst, TX starts with one plain question: what is actually inside the flue? Most homes here burn a fire a few times a year, so the work that matters is discovery, not heavy soot removal. Our technicians have up to 13 years of experience and work with professional-grade materials. We inspect it and we fix it, so a finding turns into a repair without a handoff. The humid Gulf Coast air, tall exterior chimneys, and mature pines of the piney woods around 77362 all shape what we find. Call (888) 401-8620 for a free estimate.
Why Pinehurst Homes Are Different
Pinehurst sits in the piney woods of Montgomery County north of Houston, and that setting does more to a chimney than any fire ever will. The climate is humid subtropical: hot, muggy summers and mild winters. Fireplaces go untouched for months at a stretch while moisture settles in the flue, steel components rust, and pests move in. An annual inspection matters more here than frequent sweeping.
The housing stock is predominantly custom and spec homes built from the 1990s through the 2010s, sitting on large wooded lots. Many have masonry or prefab wood-burning fireplaces with chimneys running up an exterior wall, fully exposed to sun and rain. Mature pines drop needles on roofs and into caps. Spring storms loosen what fall needle drop leaves behind. Most of this damage goes unnoticed until the first cold snap, when a fireplace smokes back into the room instead of sending it up.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Pinehurst Services
Two services account for most of the calls we get from Pinehurst homeowners: cleaning a flue that has sat idle, and repairing the components that failed while it sat.
Chimney Sweep in Pinehurst
A sweep on a Pinehurst home is rarely about thick creosote. It’s about clearing what accumulates when a fireplace goes unused through a muggy summer: pine straw, leaf litter, nests, and a fine grit of rust and debris that settles on the smoke shelf. We brush the flue and firebox, then check the cap and damper while we’re up there, because that’s where the obstruction usually starts. If you’re booking a Chimney Sweep in Pinehurst, plan it before the first cool evening, not after, so the flue is clear and dry when you finally light a fire.

Chimney Repair in Pinehurst
Repair work in Pinehurst tends to center on the parts the weather attacks: caps that have pulled loose, dampers that no longer close, crown cracks, and rusted prefab components. We work with professional brands like Famco for dampers and caps, and Olympia Chimney for less common parts, so a fix isn’t limited to what a hardware store shelf happens to carry. If you need Chimney Repair in Pinehurst, we inspect first and recommend only what the camera shows, then do the work ourselves.

Chimney Inspection in Pinehurst
Chimney inspection in Pinehurst is less about creosote and more about time. Homes built from the 1990s through the 2010s on wooded lots have had years of humid Gulf Coast air working on flues that see only light seasonal use, and many of those fireplaces were never looked at after the home changed hands. An inspection tells you what’s actually inside: moisture damage, rust, cracked flue tiles, pest blockage, or a cap that came loose in a spring storm. We photograph what we find, show it to you, and tell you plainly when a problem can wait. The full picture is what our Chimney Inspection covers, and it’s the step everything else depends on.
Fireplace Inspection
Signs you need it
Smoke that rolls back into the room, a draft that feels weak, or a fireplace you’ve never used since buying the house all point to a fireplace inspection.
What it costs in Pinehurst
A standard inspection in Pinehurst typically runs $150-$350, with a written report included.
How we do it
We examine the firebox, damper, smoke shelf, and the firebox-to-flue connection, then run a camera through the flue to document what the eye can’t reach.
Level 2 Chimney Inspection
Signs you need it
A home purchase, a chimney that’s changed hands without records, or any repair recommendation you want verified calls for a Level 2 inspection.
What it costs in Pinehurst
A Level 2 inspection in Pinehurst typically runs $250-$600 depending on flue length and access, and the written estimate sets the final price.
How we do it
We inspect every accessible part of the chimney and venting with a video camera, document the findings with photos, and walk you through each one before recommending work.
What Chimney Inspection Costs in Pinehurst
| Item | Typical range in Pinehurst |
|---|---|
| Standard fireplace/chimney inspection | $150-$350 |
| Level 2 inspection with video scan | $250-$600 |
| Sweep and inspection booked together | $180-$400 |
Do I need an inspection if I hardly ever use my fireplace?
Yes. In Pinehurst, idle flues accumulate moisture, rust, and pest debris faster than light-use flues accumulate soot, and none of that is visible from the hearth. Call (888) 401-8620 for a free estimate.
Can a camera inspection find a cracked flue liner?
Yes. A video scan shows cracked tiles, gaps at joints, and rusted prefab sections the eye can’t see from the firebox. We show you the footage and tell you whether it can wait. Call (888) 401-8620 for a free estimate.
Brands We Service in Pinehurst
Our repair and relining work draws on professional-grade brands chimney pros specify by name: DuraFlex liner systems, HeatShield resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield for caps and dampers. We don’t claim stocked parts on any truck; the brands tell you the sourcing standard. Turnaround runs a few days on most parts. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Pinehurst, TX
| Service | Typical range in Pinehurst |
|---|---|
| Standard fireplace/chimney inspection | $150-$350 |
| Level 2 inspection with video scan | $250-$600 |
| Chimney sweep | $180-$350 |
| Sweep and inspection booked together | $180-$400 |
| Chimney cap replacement | $150-$400 |
| Damper repair or replacement | $200-$550 |
| Crown repair | $300-$800 |
| Flue liner repair or relining | $1,800-$6,000 |
| Masonry tuckpointing | $400-$1,500 |
Pinehurst prices climb with height and access: a two-story exterior chimney on a wooded lot takes longer to reach and inspect than a single-story one, and rusted prefab components usually need replacement, not repair. We give you the price upfront in a written estimate, and that estimate sets the final number.
Neighborhoods We Serve in Pinehurst
We work throughout Pinehurst and the wooded lots around 77362, from older custom homes to newer spec builds on acreage. Because the streets here are spread out and many driveways sit back from the road, we schedule by area, so a call usually gets booked into the next open slot rather than a same-morning arrival. Call (888) 401-8620. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Pinehurst proper and the older custom homes near the center
- Wooded acreage tracts along the rural roads north of town
- Subdivisions off the main corridors through the 77362 ZIP
- Newer spec homes on large lots at the edges of Pinehurst
Service Area – Cities Near Pinehurst
Pinehurst sits close to several communities we also cover, so a booked visit can often be grouped with a nearby job. If you’re just outside town, we also work in Tomball, TX, Oak Ridge North, TX, Spring, TX, and Shenandoah, TX. If you’re unsure whether your address falls in our range, call and we’ll confirm before booking.
Serving Pinehurst, TX – Our Local Coverage Area
We serve Pinehurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Pinehurst
Most Pinehurst calls are booked into the next open slot, and the drive from our Conroe base is short. Call (888) 401-8620 to schedule. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Some structural masonry work and relining may require a permit through the city or county, depending on scope. We’ll tell you what your job likely needs and let you confirm with the local building department before work starts.
Yes. We serve the wooded tracts and acreage properties throughout the 77362 area, not just the subdivisions near the center of town. Call (888) 401-8620 with your address and we’ll confirm coverage and book a visit.
Call (888) 401-8620 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pinehurst Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Rosa Torres"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Javier Vargas"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Jason Schaefer